Genelec 1094A

Genelec 1094A

15" Self-Powered Subwoofer w/LCR Crossover Daily Rate: $100

Add to cart

View Cart | Check Out

The 1094A is a compact system that will reproduce frequencies of 29 - 80 Hz (± 2.5 dB). The amplifier unit integrated into the cabinet contains active crossover filters, driver overload protection circuits and a power amplifier.


The combination of the cabinet and amplifier in one unit results in a robust and simple system. The amplifier is mounted on pivoting vibration absorbers, which prevent damage to the electronics and ensures easy access and maintenance of the amplifier.


The cabinet is made from MDF with rounded corners and hardwearing textured black surface. The drivers are concealed inside an efficiency boosting cavity, which also protects them from physical damage.


Genelec 1094A was in production during the years of 1994 - 2003 and was replaced with LSETM series subwoofers.


The crossover has 3 signal channels (L/C/R) input and output channels and a discrete subwoofer signal (.1) input, providing great flexibility and allowing easy connection to existing monitor systems, whether one, two or three channel, or to proprietary surround sound decoders. The unit has adjustable sensitivity and a bass roll-off and phase matching control to tailor the response of the subwoofer to its environment. 


Free field frequency response ( ±2.5dB):

29 - 80 Hz

Maximum short term sine wave

acoustic output in half space,

averaged from 35 Hz to 85 Hz @ 1m:

> 120 dB SPL

Self generated noise level in 

free field @ 1m on axis (A-weighted):

< 10 dB

Harmonic distortion at 100 dB SPL @ 1m

on axis in half space (30-100 Hz):

< 3%


385 mm (15")


50 kg (110 lbs)





739 mm (29 1/16")

468 mm (18 7/16")

620 mm (24 7/16")



Amplifier output power

(Long term output power is limited

by driver unit protection circuitry):

400 W (8 Ohm)

Amplifier system distortion at nominal output:

THD < 0.08%

SMPTE-IM < 0.08%

CCIF-IM < 0.08%

DIM 100 < 0.08%

Signal to Noise ratio, referred to full output:

> 100 dB

Mains voltage:

100/200V or 115/230V

Power consumption (average):

Idle 60 VA

Full output 650 VA



Subsonic filter (18 dB/octave) below:

29 Hz

Crossover frequency (sub/main monitors):

85 Hz

Crossover frequency (sub input channel):

full band/85 Hz

Crossover acoustical slope



28 dB/octave

12 dB/octave

Midband rejection, frequencies > 400 Hz:

> 50 dB

Bass roll-off control operating range

in 2 dB steps:

from 0 to -6 dB @ 33 Hz

Phase matching control in 90° steps:

from 0° to -270° @ 85 Hz


There are no items in your shopping cart.